TROUBLESHOOTING
Before calling for service
Your dryer is equipped with an automatic error-monitoring system to detect and diagnose problems at an early stage. If your dryer does not
function properly or does not function at all, check the following before you call for service.
Dryer will not
turn on
tripped, or power outage has occurred.
the dryer’s rating plate.
problem is a circuit overload, have it corrected by a qualified electrician.
Dryer does not heat
tripped, or power outage has occurred.
(gas models only).
problem is a circuit overload, have it corrected by a qualified electrician.
open.
Greasy or dirty spots
on clothes
together.
soil clean clothes placed in the same or subsequent loads.
washing process.
Make sure that clothes are being completely cleaned according to the
instructions for your washer and detergent.
Display shows error
Lint on clothes
produce high amounts of lint, it may be necessary to clean the filter during the
cycle.
be dried separately from clothes that are lint trappers (i.e., a pair of black linen
pants).
Excess static in
clothes after drying
synthetic blends.
softeners or products to eliminate static unless recommended by the
manufacturer of the fabric softener or product.
settings and use a shorter drying time, or use SENSOR DRY cycles.
Display shows error
code PS
TROUBLESHOOTING
To Next Page
Loading...
