32
HOW TO USE
Custom program
If you have a special combination of settings that you use
frequently, you can save these settings as a custom program.
* To save a custom program:
5VSOPOUIFESZFSBOEUVSOUIFDZDMFTFMFDUPSLOPCUPTFMFDUUIF
desired cycle.
6TFUIFDZDMFTFUUJOHCVUUPOTUPBEKVTUUIFTFUUJOHTGPSUIBU
cycle.
3. Press the cycle option button(s) for the option you would like to
add. A confirmation message will be shown in the display.
4. Press and hold the CUSTOM PROGRAM button for 3 seconds.
To recall a custom program:
5VSOPOUIFESZFS
1SFTTUIF$6450.130(3".CVUUPOUPTFMFDUUIFTBWFEDZDMF
3. Press the START/PAUSE button to start the cycle.
Steam functions
To Fill the Steam Feeder
1VMMPVUUIFESBXFS
-JGUPVUUIFTUFBNGFFEFS
3. Fill the steam feeder just to the filter screen.
4. Place the steam feeder in the drawer; then push in the drawer
until it clicks into place.
W
WARNING
t%POPUGJMMUIFTUFBNGFFEFSXJUIMJRVJETTVDIBTHBTPMJOF
ESZDMFBOJOHTPMWFOUTPSPUIFSGMBNNBCMFPSFYQMPTJWF
TVCTUBODFTFailure to follow this warning can cause serious
injury or death.
t%POPUESJOLXBUFSGSPNUIFTUFBNGFFEFS Failure to follow
this warning can cause serious injury or death.
Drawer
Water
ONLY
Steam
Feeder
NOTE
You may save only one custom program at a time. Pressing
and holding the CUSTOM PROGRAM button will overwrite any
previously saved custom program.
NOTE
#FGPSFVTJOHB4UFBN$ZDMFUIFTUFBNGFFEFSNVTUCFGJMMFE
with water up to the MAX line. If not, the will be
displayed. Make sure that the steam feeder is filled with water
or the drawer is fully closed. Turn the dryer off then restart the
steam cycle.
t0OMZVTFXBUFS%POPUGJMMUIFTUFBNGFFEFSXJUIGPSFJHO
substances, rinse agents, or detergents.
t#FGPSFNPWJOHUIFESZFSNBLFTVSFUIFTUFBNGFFEFSJT
empty.
t%POPUVTFEJTUJMMFEXBUFSUIFXBUFSMFWFMTFOTPSJOUIFTUFBN
generator will not work.
t#FDBSFGVMUPQVUUIF4UFBN'FFEFSPUIFSXJTFXBUFSXJMMCF
overflow.
t8JQFVQBOZTQJMMFEXBUFSBSPVOEUIF4UFBN'FFEFSBOEUIF
drawer before starting the dryer.
t%POPUGJMMUIFTUFBNGFFEFSXJUIIPUXBUFSPWFS¡'¡$