LG DLGX2651W - Pedestal Installation

wWARNING
To ensure safe and secure installation, please
thoroughly follow the instructions below.
PEDESTAL INSTALLATION
Tools Needed for Installation:
•Phillipsscrewdriver
•Wrench(supplied)
•Incorrectinstallationcancauseserious
accidents.
•The appliances are heavy. Two or more
people are required when installing the
pedestal. There is a risk of serious back injury
or other injuries.
•Donotallowchildrentoplayinoronthe
drawer. There is a risk of suffocation or injury.
•Donotsteponthehandle.There is a risk of
serious injury.
•Ifappliancesarealreadyinstalled,
disconnect them from all power, water, or
gas lines and from draining or venting
connections. Failure to do so can result in
electric shock, fire, explosion, or death.
•Wheninstalling,glovesmustbeputon.
The pedestal accessory includes:
•Drawerdivider(1) •Wrench(1)
•Screws(18)† •Retainers(4)††
2
Insert the T-clip of the 4 retainers into the
dryer base as shown. Press up on the
back of the clip and pull outward to lock
into place.
Retainer
T-clip
1
Make sure the leveling feet of the dryer
are fully retracted.
NOTE: The appliance and pedestal assembly
must be placed on a solid, sturdy, level floor
for proper operation.
Retract fully
†Dryerinstallationonlyuses8screws
††Fordryeronly
44
MFL67408111_EN_111004.indd 44 2011.10.4 10:41:5 AM