34
OPERATION_DLE3600* / DLG3601* / DLEX4*00* / DLGX4*01* / DLEX4080* / DLGX4081*
The Steam Options
The Reduce Static option injects steam late in the
drying cycle to reduce the static electricity caused
by dry fabrics rubbing together.
NOTE
• When Sensor Dry is selected with the Reduce
Static option, the dry levels below Normal
cannot be selected.
• The Reduce Static option can also be selected
during Time Dry cycles.
• After the Steam option is selected in Time
Dry, the More Time or Less Time buttons will
change the steam time ONLY.
• Press the More Time or Less Time button to
adjust the cycle time depending on the size of
the load (7, 9, 11, 14, 16, or 18 items).
Adding Steam to a Standard Cycle
1
Turn on the dryer and turn the cycle selector
knob to select the desired cycle.
2
Use the cycle setting buttons to adjust the
settings for that cycle.
3
Press Turbo Steam to add steam. If desired,
select the Reduce Static or Wrinkle Care
options. Then adjust for the load size using the
More Time or Less Time buttons.
4
Press Start/Pause to start the cycle.
NOTE
• Steam may not be clearly visible during the
steam cycles. This is normal.
• Do not use Steam Fresh™ with items such as
wool, wool blankets, leather jackets, silk, wet
clothes, lingerie, foam products, or electric
blankets.
• For best results, load articles of similar size
and fabric type. Do not overload.
• When the filter/duct is clogged, the steam
option may not have optimal results.
• When the steam function is operating, the
drum will stop to allow steam to stay in the
drum.
To Next Page
Loading...
Need help?
General
