13
OPERATION_DLE3500* / DLG3501* / DLE3460* / DLG3461* / DLEX3*00* / DLGX3*01*
ENGLISH
Time and Status Display
The display shows the settings, estimated time
remaining, options, and status messages for the
dryer.
7
Cycle Option Buttons
Press each of these buttons to select additional
cycle options. And press and hold any button
marked with an asterisk for 3 seconds to activate a
special function.
8
Steam Functions
LG’s steam technology allows you to inject fabrics
with a swirling jet of steam to refresh clothes,
reduce static, and make ironing easier. Simply
select the Steam Fresh™ or Steam Sanitary™
cycle or you can add a Steam option to selected
cycles.
Power Button
Press the button to turn the dryer ON. Press again
to turn the dryer OFF.
NOTE
• Pressing the Power button during a cycle will
cancel that cycle and any load settings will be lost.
Cycle Selector Knob
Turn this knob to select the desired cycle. Once
the desired cycle has been selected, the standard
presets will be shown in the display. On Manual
Dry cycles, these settings can be adjusted using
the cycle modifier buttons anytime before starting
the cycle.
3
Start/Pause Button
Press this button to start the selected cycle. If the
dryer is running, use this button to pause the cycle
without losing the current settings.
NOTE
• If you do not press the Start/Pause button to
resume a cycle within Certain Time, the dryer turns
off automatically and all cycle settings are lost
.
4
Cycle Modifier Buttons
Use these buttons to select the desired cycle
settings for the selected cycle. The current settings
are shown in the display. Press the button for that
option to view and select other settings.
5
More Time/Less Time Buttons
Use these buttons with the Time Dry and other
Manual Dry cycles to adjust the drying time. Press
the More Time button to increase the selected
manual cycle time by 1 minute; press the Less
Time button to decrease the cycle time by 1
minute.
To Next Page
Loading...
Need help?
General
