50
DRYER EXHAUST CHANGE
1.
Remove screw and exhaust duct.
bottom
2.
3.
4.
5.
WARNING !
Before performing this exhaust installation, be sure to
disconnect the dryer from its electrical supply. Protect your
hands and arms from sharp edges when working inside the
cabinet. To reduce the risk of Injury to persons adhere to all
industry recommended safety procedures including the useof
long sleeved gloves and safety glasses.
Note : Use real foil duct tape. Do not use the
inexpensive canvas and adhesive tape. It will
dry out, leak lint, and present a fire hazard.
⑪
To Next Page
Loading...
