22 INSTALLATION
2 Connect the drain hose of the dryer and
secure the hose clamp.
• Leaving the drain hose disconnected can cause
leaking andsubsequent property damage.
Using a Standpipe to Drain
1 Clip the end of the hose into the elbow
bracket.
• Connect the elbow bracket
a within 4
inches (10 cm) of the end of the drain hose.
If the drain hose is extended more than 4
inches (10 cm) beyond the end of the elbow
bracket, mold or microorganisms could
spread to the inside of the dryer.
2 Insert the end of the drain hose into the
standpipe.
3 Use the provided tie strap b to secure the
drain hose in place.
Using the Laundry Tub to Drain
1 Clip the end of the hose into the elbow
bracket. Connect the drain hose holder to the
end of the hose so that the hose does not
come out.
• Connect the elbow bracket
a within 4
inches (10 cm) of the end of the drain hose.
If the drain hose is extended more than 4
inches (10 cm) beyond the end of the elbow
bracket, mold or microorganisms could
spread to the inside of the dryer.
2 Hang the end of the drain hose over the side
of the laundry tub.
3 Use the provided tie strap to secure the drain
hose in place.
4 "
(10 cm)