Copyrightⓒ. 2019. All Rights Reserved.
4 / 5
⑦ You can see the AP List and signal strength(RSSI). Click AP SSID which is used in your test.
⑧ Click the connect message.
⑨ You will see the wait message
⑩ If you finish the process, your cellular phone disconnects from PoE Wi-Fi Bridge.
⑪ PoE Will reboot. After a few seconds, WLAN LED will be red. The red means that PoE Wi-Fi Bridge is connecting with AP
If WLAN LED is blinking Blue, AP connection is end.
⑦
⑧
⑨
⑩
⑪
To Next Page
Loading...
