Settings
63
Connecting TTY Equipment and a Terminal
1. Connect a TTY cable to the TTY connection on the phone (TTY
connection location is the same as a headset jack).
2. Access the phone's Settings menu and set the desired TTY mode.
3. After setting a TTY mode, check the screen of the phone for the TTY icon.
4. Connect the TTY equipment to the power source and turn it on.
5. Make a phone connection to the desired number.
6. When connection is made, use the TTY equipment to type in and send a
text message or send voice.
7. The voice or text message from the receiver end will appear on the TTY
equipment display.
Hearing aid
1. From the Accessibility menu screen, press the 8 key Hearing aid.
2. Use the Navigation key to select On or Off, then press the OK key
OK.
To Next Page
Loading...
