LG F171K2CS2W - Page 28

28
Máchání (Rinse)
Máchání
+
s přidržením (Rinse
+
+Hold)
Add rinse once then after rinsing process, the course is
paused until
Start/Pauza
button is pressed again.
Normální s přidržením (Normal+Hold)
The course is paused until start button is pressed again
when rinse is nished.
Máchání++ (Rinse++)
Add rinse twice.
Máchání+ (Rinse+)
Add rinse once.
Odstředění (Spin)
•
Spin speed level can be selected by pressing the
Odstředění
button repeatedly.
•
Spin Only
1
Press the
Napájení
button.
2
Press the
Odstředění
button to select RPM.
3
Press the
Start/Pauza
button.
Teplota (Temp.)
The
Teplota
button selects the wash and rinse
temperature combination for the selected cycle. Press
this button until the desired setting is lit. All rinses use
cold tap water.
•
Select the water temperature suitable for the type of
load you are washing. Follow the garment fabric care
labels for best results.
Child Lock ( )
Select this function to lock the buttons on the control
assembly to prevent tampering.
Locking the control panel
1
Press and hold the
Praní
and
Máchání
button for 3
seconds.
2
A beeper will sound, and ‘ ’ will appear on the
display.
When the child lock is set, all buttons are locked
except the
Napájení
button.
NOTE
•
Turning off the power will not reset the child lock
function. You must deactivate child lock before
you can access any other functions.
Unlocking the control panel
Press and hold the
Praní
and
Máchání
button for 3
seconds.
•
A beeper will sound and the remaining time for the
current programme will reappear on the display.
Zvuková Signalizace (Buzzer On/Off)
1
Press the
Napájení
button.
2
Press the
Start/Pauza
button.
3
Press the
Zvuková Signalizace
button set the
buzzer on/off function.
NOTE
•
Once the Buzzer on/off function is set, the setting
is memorized even after the power is turned off.
•
If you want to turn the Beeper off, simply repeat
this process.