LG FDV708W - Page 13

13
EN
1
Open the door and remove 2 screws on the
door hinge(a). After removing the screws, put
the door down carefully from the cabinet(b)
with the front side facing down to the floor.
WARNING
• Remove the lower screw first. The door may
fall on to the floor due to its weight and the door
can be damaged.
2
Remove 8 screws on the hinge assembly(c)
from the door.
• There are 6 screws on the front and 2
screws on the side.
c
3
Remove the 3 screws from the door latch
assembly(d) which is fixed between the door
and the hinge assembly, and then remove the
screw which is fixed on the door hook.
d
4
Switch the position between the hinge
assembly(c) and door latch assembly(d) and
then tighten the screws in reverse order.
• Tighten the screw in proper position
referring from 2 to 4 steps.
cd
5
Remove the door catch(e) from the appliance
frame by removing 2 screws and then
assemble them on the opposite side.