1. START/STOP BUTTON
Operation starts when this button is pressed and
stops when the button is pressed again.
2. OPERATION MODE SELECTION BUTTON
Used to select the operation mode.
3.
ROOM TEMPERATURE SETTING BUTTONS
Used to select the room temperature.
4. INDOOR FAN SPEED SETTING
BUTTONS
Used to select fan speed in four steps
low, medium, high, or chaos/auto.
5. JET COOL
Used to start or stop the speed cooling. (Speed
cooling operates super high fan speed in cooling
mode.)
6. CHAOS/AUTO SWING BUTTON
Used to stop or start louver movement and
set the desired up/down airflow direction.
- 61 -
(2) Operation
■ Room/Cassette/Art Cool Type Indoor Unit
1. Name and funcition-Remote Controller (Door Closed)
To Next Page
Loading...