17
■The materials of parts used on the product are as follows.
Part Material Surface treatment
Front case PC resin Deposition
Rear case PC-PCR 50% -
Power/Lock Key AL Anodic oxide
Volume keys PC resin Painting
Display Hardened glass -
Earpiece
Titanium
SUS
Baking coating
White -
Lens for the camera Acrylic Deposition, printing
Flash Acrylic -
Infrared sensor
Laser Auto Proximity sensor
PC resin -
Do not bring the product close to magnetized objects
such as cash cards, oppy disks, credit cards, and
prepaid cards. Doing so might result in loss of recorded
information.
Do not allow liquids, metal objects, burnable items, and
other foreign matter to get inside the au Micro IC Card
(LTE)/microSD card slot or earphone jack. Failure to do so
might cause re, electric shock, injure or a fault.
Do not swing this product around by holding earphones,
etc. Doing so might cause an accident or damage.
Be careful when setting vibrator (vibration) or ringtone if
you heart is weak. Doing so might result in bad eect to
heart.
To Next Page
Loading...
