28
● Contents saved in the product, such as contacts, mails and favorites,
might be altered or lost in an accident, fault, repair or mishandling.
Be sure to keep a copy of important contents. Note that Company
assumes no responsibility for any damages or lost profits resulting from
altered or lost contents.
● Note that contents (both charged or free content) saved with the
product cannot be returned to the customer when it is replaced for
repair of a fault, for example.
● The product uses liquid crystal for its display. The display response
speed may become slow when the ambient temperature is low, which is
due to the property of liquid crystal and not a malfunction. The display
response speed will return to normal at room temperature.
● Although the display used on the product is made using high-precision
technology, some pixels (dots) might be lit or out at all times. Note that
this is not a malfunction.
● Take care not to inconvenience people around you when you use the
product in a public place.
● You are recommended to store copies of individual data such as photos
you took, videos and music on your PC by sending each file as mail
attachment, etc. Note, however, that you may not be able to make
copies of any copyrighted data even by the above mentioned means.
● Take care not to place magnetized items such as magnetic cards,
speakers and TV sets near the product, as it might cause malfunction.
Putting a strong magnetism close to the product might cause false
operation.
● When you put the product in your pocket or bag, take care so that
the display does not come in contact with metal objects or other hard
objects. Doing so might cause scratching or damage. Also, be careful
not to scratch or damage the display by using a strap whose metal or
other hard part comes in contact with the display.
● When suddenly brought into a warm place from a cold place, or when in
a humid location, or when used where temperature suddenly changes
such as near the air discharge port of an air conditioner, water droplets
(i.e. condensation) sometimes form inside the product. Note that when
used under conditions such as this, the humidity might cause corrosion
or a fault.
To Next Page
Loading...
