Back-Facing Camera Lens
Power/Lock Key, Finger Print Sensor
Nano-SIM /microSD Card Tray
Volume Keys
Module Eject Key
Module
Charger/USB port (C-type)
Removing the battery
1 Press the module eject key to partly eject the
module from the device.
Module Eject Key
Module
2 Grab the middle of the ejected module and
pull it out.
Removing or inserting the
battery
Removing or inserting the
battery
Removing or inserting the
battery
Parts overview
3 Hold the battery and module with both hands
and separate them from one another in an
outward arc (as indicated below) to
disconnect the battery terminals.
NOTE
• This device is supplied with the battery inserted. When
using the device for the first time, check the battery level
and fully charge the battery before using the device if
necessary.
Inserting the battery
1 Align the arrows on both the battery and the
moduleandrmlyconnectthebattery
terminals to the module.
2 Align the battery with the lower edge and
carefully slide the module back into the device.
NOTE
• Never press the module eject key when inserting the
module into the device.
• When inserting the battery into the device, make sure the
battery is attached to the module.
QUICK START GUIDE
MBM65422901 (1.0)
U.S. Cellular®
Customer Care:
1-888-944-9400