51
01
02
03
04
05
06
07
08
SETTINGS
Pairing with another Bluetooth
device
By pairing your GB250 and another device,
you can set up a passcode protected
connection. This means your pairing is more
secure.
1 Check your Bluetooth is On and Visible.
You can change your visibility in the
Settings menu, by selecting My device
visibility, then Visible.
2 From Bluetooth, choose Turn on and
Select Search new device
3 Your GB250 will search for devices. When
the search is completed Add and Refresh
will appear on screen.
4 Choose the device you want to pair with,
select Add and enter a passcode then
choose OK.
5 Your phone will then connect to the other
device, on which you should enter the
same passcode.
6 Your passcode protected Bluetooth
connection is now ready.
Using a Bluetooth headset
1 Check your Bluetooth is On and Visible.
2 Follow the instructions that came with your
headset to place it in pairing mode and
pair your devices.
3 Your GB250 will then automatically
connect to your Bluetooth headset and
switch to headset profile.
Transferring a file to your phone
You can also transfer files from your computer
to your phone using Bluetooth.
1 Make sure your phone and computer have
Bluetooth switched on and are visible to
one another.
2 Use your computer to send the file via
Bluetooth.
3 When the file is sent you will have to
accept it on your phone by selecting Yes.
4 The file will be saved within the appropriate
folder depending on type. So for example,
photographs will be saved in the Pictures
folder and music in the Sounds folder. If
your phone cannot identify the file type, the
file will be saved in the Others folder.
Note: Files sent using Bluetooth will be saved
to the phone memory.
To Next Page
Loading...
