LG GD510 - Page 97

7
Bluetooth
bers,
e
one.
e
ng
Pairing with another Bluetooth device
By pairing your GD510 and another device, you can set up a passcode protected
connection.
1 Check that your Bluetooth is ON and Visible. You can change your visibility in
the Settings menu.
2 Touch Search.
3 Your GD510 will search for devices. When the search is completed, Refresh will
appear on screen.
4
Choose the device you want to pair with and enter the passcode, then touch OK.
5 Your phone will then connect to the other device, on which you will need to
enter the same passcode.
6 Your passcode protected Bluetooth connection is now ready.
Sending and receiving your files using Bluetooth
To send a file:
1 Open the file you want to send, typically this will be a photo, video or music file.
2 Choose Send.
Choose Bluetooth.
3 If you have already paired the Bluetooth device, your GD510 will not
automatically search for other Bluetooth devices. If not, your GD510 will search
for other Bluetooth enabled devices within range.
4 Choose the device you want to send the file to.
5 Your file will be sent.
TIP! Check the progress bar to make sure your  le is sent.
To receive a file:
1 To receive files, your Bluetooth must be both ON and Visible. See Changing
your Bluetooth settings below for more information.