Freezer Handles Types:
Handle type 3
REFRIGERATOR INSTALLATION
1.
Removing Freezer Handle
NOTE: Before start, check handle type in your model.
Remove the cap (1) and the 2 caps (2) using a slotted
screwdriver.
Loosen the 2 screws (3), take of f the handle (4), and
install it on the right.
Attach the caps you removed earlier [figures (1) and
(2)].
Handle Type 1
Handle Type 2 and Handle Type 3
For these handle types are not necessary remove it.
Please remove the door with the handle assembled
To Next Page
Loading...
