USING YOUR REFRIGERATOR
TILTING DOOR (on some models)
The tilting door provides easy access to stored foods.
How to use:
Tilt the door down and pull it out. E
adjust
- 63 -
To remove, lift basket up and pull out straight out.
GLIDE OUT DRAWER BASKET -
1.
2. To Install, pull both rails out to full extension.
Hook the basket supports into the rail tabs and push to
the back of compartment.
WIRE DURABASE (on some models)
1. To remove wire Durabase, pull wire durabase out to full
extension.
Tilt up the front of the wire Durabase and pull it straight
out.
2. To install, insert the wire Durabase into frame rails and
push back into place.
FREEZER SHELF (on some models)
To remove the shelf, take it from the front part, and pull it
towards you.
To place the shelf, reverse the removal procedure.
(on some models)
1
2
WARNING: Be careful when you open tilting door so
that you do not injure your foot!
To
WARNING:
To avoid hand injury, keep your hands away
from tilting device when drawer is open.
To Next Page
Loading...
