EasyManua.ls Logo

LG GMD916SBHZ - Ambient Temperature; Turning on the Power; How to Remove the Fridge Door

LG GMD916SBHZ
48 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
17
INSTALLATION
ENGLISH
Ambient Temperature
Install this appliance in an indoor area where the
temperature is between 55°F (13°C) and 110°F
(43°C). If the temperature around the appliance
is too low or high, the cooling ability may be
adversely affected.
1
Place your appliance where it is easy to use.
2
Avoid placing the unit near heat sources,
direct sunlight or moisture.
3
To ensure proper air circulation around the
fridge -freezer, please maintain sufficient
space on both the sides as well as top and
maintain at least 2 inches (5.08 cm) from the
rear wall.
4
To avoid vibrations, the appliance must be
leveled.
5
Don’t install the appliance below 41°F (5°C).
It may affect the performance.
2” (5.08 cm)
24” (61 cm)
How to Remove the Fridge Door
(TURN OFF THE MAIN POWER.
Same procedure for left and
right doors)
1
Remove the fridge door hinge cover. (left
side)
2
Disassemble connection plugs and ground
wires.
Turning On The Power
Plug in the fridge.
CAUTION
y
Connect to a rated power outlet.
y
Have a certified electrician check the wall
outlet and wiring for proper grounding.
y
Do not damage or cut off the ground
terminal of the power plug.

Related product manuals