40
LG ThinQ Application
3
Touch the add (
~
) button on the
LG
ThinQ
application to connect your LG
appliance. Follow the instructions in
the application to complete the
process.
• To verify the Wi-Fi connection, check
that the Wi-Fi indicator on the control
panel is lit.
• The appliance supports 2.4 GHz Wi-Fi
networks only. To check your network
frequency, contact your Internet
service provider or refer to your
wireless router manual.
•
LG ThinQ
is not responsible for any
network connection problems or any
faults, malfunctions, or errors caused
by network connection.
• The surrounding wireless environment
can make the wireless network service
run slowly.
• If the distance between the appliance
and the wireless router is too far, the
signal strength becomes weak. It may
take a long time to connect or
installation may fail.
• If the appliance is having trouble
connecting to the Wi-Fi network, it may
be too far from the router. Purchase a
Wi-Fi repeater (range extender) to
improve the Wi-Fi signal strength.
• The network connection may not work
properly depending on the Internet
service provider.
• The Wi-Fi connection may not connect
or may be interrupted because of the
home network environment.
• The appliance cannot be connected
due to problems with the wireless
signal transmission. Unplug the
appliance and wait about a minute
before trying again.
• If the firewall on your wireless router is
enabled, disable the firewall or add an
exception to it.
• The wireless network name (SSID)
should be a combination of English
letters and numbers. (Do not use
special characters.)
• Smartphone user interface (UI) may
vary depending on the mobile
operating system (OS) and the
manufacturer.
• If the security protocol of the router is
set to
WEP
, you may fail to set up the
network. Please change it to other
security protocols (
WPA2
is
recommended) and connect the
product again.
• To disable the Wi-Fi function, press and
hold the
Wi-Fi
button for 3 seconds.
The Wi-Fi indicator will be turned off.
• To reconnect the appliance or add
another user, press and hold the
Wi-Fi
button for 3 seconds to temporarily
turn it off. Run the
LG ThinQ
application and follow the instructions
in the application to connect the
appliance.
Wireless LAN Module
Specifications
Model LCW-010
To Next Page
Loading...
