69
Levelling and Door Alignment
Levelling and Door Alignment
Before Beginning
When the appliance doors appear to be
uneven, follow the instructions below to
align the doors.
• The spanner may differ depending on
the model. You will be provided with
either spanner type A or B.
- Spanner Type A
- Spanner Type B
Levelling the Appliance
The appliance has two front levelling
legs. Adjust the legs to alter the tilt from
front to back or side to side. If the
appliance seems unsteady, or the doors
do not close easily, adjust the appliance’s
tilt using the instructions below.
Use the spanner
A
to adjust the height
by turning the levelling leg to the left to
raise it or to the right to lower it.
• Leveling the doors may not be possible
when the floor is not leveled, or is of
weak or poor construction.
• The refrigerator is heavy and should
be installed on a rigid and solid
surface.
• Some timber flooring may cause
levelling difficulties if it flexes
excessively.
To Next Page
Loading...
