LG Electronics 110/115 LGE Property
2.10. Calibration data will be saved to the following folder.
Notices:
1. The state of Phone is “ test mode “ during the CALIBRATION.
2. Calibration program automatically changes either “normal mode” or “ptest mode”.
3. RF Calibration steps as follow:
TX Channel compensation: EGSM->GSM850->DCS->PCS->EDGE EGSM->EDGE GSM850->EDGE DCS->EDGE
PCS
RX Channel compensation: EGSM->GSM850->DCS->PCS
4. Phone Operation Mode
< Normal Mode > < Ptest Mode>
Saving Format:
Year/month/day_pass or fail
To Next Page
Loading...
