- 54 -
LGE Internal Use Only Copyright © 2010 LG Electronics. Inc. All right reserved.
Only for training and service purposes
3. TECHNICAL BRIEF
ͽͶͺΟΥΖΣΟΒΝΆΤΖΟΝΪ
3.12.2.3. HS-USB
The High-Speed USB module contains an embedded UTMI+ core with a built-in transceiver eliminating the need for
an external PHY. The HS-USB port is a standard 4-pin interface that connects directly to the USB connector
(USBPHY_DP, USBPHY_DN, USBPHY_ID and USBPHY_VBUS). Two additional pins are required for PHY operations
which include an external reference resistor pin (USBPHY_REXT) and a USB system clock pin which the USB PHY uses
to lock its internal PLL (SYS_CLK)
Figure. HS-USB connections and architecture
To Next Page
Loading...
