LG GT540 - Page 97

- 98 -
LGE Internal Use Only Copyright © 2010 LG Electronics. Inc. All right reserved.
Only for training and service purposes
4. Trouble Shooting
Set the phone Rx is ON
Check BIAS over 2.1V
Check bias block soldering
No
Yes
Change the board
Check TP1 Signal exist?
Check RF Switch (M/S)
No
Yes
Check TP2 Signal exist?
Check TX Module Refer 1.4
No
Yes
Check TP3 Signal exist?
Check Duplexer
No
Yes
Check TP4 Signal exist?
Check RTR6285 and Rx SAW filter
No
Yes