instafiatio,n
1. insert the guide panels(Type G)
into the guides of the air conditioner
(Type H),Fasten the curtains to the
unit with screws (Type A).
: Use a I,ong screwdriver and
installing the screws will be easier.
//_ ii ¸%¸%%
/
2, Cut the adhesive-back_ seal s_ip
(Type E) to the window width,
Remove the backing from the seal
s_ip and attach the seal strip to the
underside of the _ttom window,
3. Liocating unit in window
Open the window and mark center line
on the center of the inner sill,
4 Attach L bracket
4-1, Install the L brackets behind the
inner window sill, with short side of
bracket as sh_n. Use the 2 sicrews
(Type A) provided.
4-2, The bracket helps to hold unit
securely in place. Be sure to place
bracket edge flush against back of
inner sill
_nr_,rSill
Outer Si_i
A Inside
Cer_er Line
O_side
ILBracket
O'wner_s Manual 13
To Next Page
Loading...
