Installation Manual 5
Safety Precautions
Always check for gas (refrigerant) leakage after
installation
or repair of product.
• Low refrigerant levels may cause failure of
product.
Install the drain hose to ensure that water is
drained
away properly.
• A bad connection may cause water leakage.
Keep level even when installing the product.
• To avoid vibration or water leakage.
Do not install the product where the noise or hot air
from the outdoor unit could damage the
neighborhoods.
• It may cause a problem for your neighbors.
Use two or more people to lift and transport the
product.
• Avoid personal injury.
Do not install the product where it will be
exposed to sea wind (salt spray) directly.
• It may cause corrosion on the product.
Corrosion,
particularly on the condenser and
evaporator fins, could cause product
malfunction
or inefficient operation.
To Next Page
Loading...