<Data settings>
Appears only if you select Data
Settings as a Bearer/service.
- Dial number:
Enter the telephone
number to dial to access your WAP
gateway.
- User ID:
The users identity for your
dial-up server (and NOT the WAP
gateway).
- Password:
The password required
by your dial-up server (and NOT the
WAP gateway) to identify you.
- Call type:
Select the type of data
call; Analogue or Digital (ISDN).
- Linger time:
You need to enter
timeout period.
After entering that, the WAP
navigation service will be unavailable
if any data is not input or transferred.
- Primary server:
Input the IP address
of the primary DNS server you
access.
- Secondary Server:
Input the IP
address of the secondary DNS server
you access.
The service settings are only available
when GPRS is chosen as a bearer
service.
-
APN:
Input the APN of the GPRS.
-
User ID:
The users identify for your
APN server.
-
Password:
The password required
by your APN server.
-
Primary Server:
Input the IP address
of the primary DNS server you
access.
-
Secondary:
Input the IP address
of the secondary DNS server you
access.
Connectivity
Connec tivity
To Next Page
Loading...
