29
Activate the Multiparty Call on Hold
To activate a multiparty call on hold, press the S
key. Alternatively press the left soft key [Options] and
select Join all/Hold all calls. Other users on hold will
stay connected. To return to multiparty call mode,
press the left soft key
< [Options] followed by
Multiparty call.
Adding Calls to the Multiparty Call
To add a call to an existing multiparty call, press
the left soft key, and then select the Join menu of
Multiparty call.
Private Call in a Multiparty Call
To have a private call with one caller from a
multiparty call, display the number of the caller you
wish to talk to on the screen, then press the left soft
key. Select the Private menu of Multiparty call to put
all the other callers on hold.
Ending a Multiparty Call
Currently displayed caller from a multiparty call can
be disconnected by pressing the E key.
Muting the Microphone
You can mute the microphone during a call by
pressing the [Options] key then selecting [Mute]. The
handset can be unmuted by pressing the [Unmute].
When the handset is muted, the caller cannot hear
you, but you can still hear them.
DTMF tones while calling
To switch on DTMF tones while calling (e.g. to use
the phone with an automatic switchboard) press the
key [Options] followed by Send DTMF – DTMF on.
Select DTMF off to disable DTMF tones. DTMF tones
are normally on.
Multiparty Calls
The multiparty service provides you with the ability
to have a simultaneous conversation with more than
one caller, if your network service provider supports
this feature. A multiparty call can only be set up
when you have one active call and one call on hold,
both calls having been answered.
Once a multiparty call is set up, calls may be added,
disconnected or separated (that is, removed from
the multiparty call but still connected to you) by
the person who set up the multiparty call. These
options are all available from the In-Call menu. The
maximum callers in a multiparty call are five. Once
started, you are in control of the multiparty call, and
only you can add calls to the multiparty call.
Making a Second Call
You can make a second call while currently on a
call. Enter the second number and press the S.
When the second call is connected, the first call
is automatically placed on hold. You can swap
between calls, by pressing the
S key.
Setting Up a Multiparty Call
To set up a multiparty call, place one call on hold and
while the active call is on, press the left soft key and
then select the Join menu of Multiparty call.
IN-CALL MENU
| IN-CALL MENU
To Next Page
Loading...
