LG KG800 - Page 188

Each profile has submenus as follows:
]
Activate: Activates the selected profile.
]
Settings: Use this to edit and change WAP
settings for the selected profile.
- Homepage: This setting allows you to
enter the address (URL) of a site you want
to use as homepage. You do not need to
type http:// at the front of each URL as the
WAP Browser will automatically add it.
- Bearer: You can set the bearer data service.
1 Data/2 GPRS
- Data settings: Appears only if you select
Data Settings as a Bearer/service.
Dial number: Enter the telephone number
to dial to access your WAP gateway.
User ID: The users identity for your dial-up
server (and NOT the WAP gateway).
Password: The password required by your
dial-up server (and NOT the WAP gateway)
to identify you.
Call type: Select the type of data call :
Analogue of Digital (ISDN).
Linger time: You need to enter timeout
period. After entering that, the WAP
navigation service will be unavailable if any
data is not input or transferred.
- GPRS settings: The service settings are
only available when GPRS is chosen as a
bearer service.
APN: Input the APN of the GPRS.
User ID: The users identify for your APN
server.
Password: The password required by your
APN server.
- Proxy settings
Proxy: Activates or cancels proxy.
IP address: Input the IP address of the
Proxy server you access.
Port number: Input the Proxy Port.
- DNS settings
Primary server: Input the IP address of the
primary DNS server you access.
Browser
69