LG KG800 - Page 192

Each profile has submenus as follows:
]
Activate: Activates the selected profile.
]
Settings: Use this to edit and change WAP
settings for the selected profile.
- Homepage: This setting allows you to
enter the address (URL) of a site you
want to use as homepage. You do not
need to type http:// at the front of each
URL as the WAP Browser will
automatically add it.
- Bearer: You can set the bearer data
service. 1 Data/2 GPRS
- Data settings: Appears only if you select
Data Settings as a Bearer/service.
Dial number: Enter the telephone
number to dial to access your WAP
gateway.
User ID: The users identity for your dial-
up server (and NOT the WAP gateway).
Password: The password required by
your dial-up server (and NOT the WAP
gateway) to identify you.
Call type: Select the type of data call :
AnalogÎue of Digital (ISDN).
Linger time: You need to enter timeout
period. After entering that, the WAP
navigation service will be unavailable if
any data is not input or transferred.
- GPRS settings: The service settings are
only available when GPRS is chosen as a
bearer service.
APN: Input the APN of the GPRS.
User ID: The users identify for your APN
server.
Password: The password required by
your APN server.
- Proxy settings
Proxy: Activates or cancels proxy.
IP address: Input the IP address of the
Proxy server you access.
Port number: Input the Proxy Port.
- DNS settings
Primary server: Input the IP address of
the primary DNS server you access.
Secondary server: Input the IP address
of the secondary DNS server you access.
Browser
73