The following options are available:
• Power On
- Enable
You are required to enter the phone password when you switch
the phone on.
- Disable
You do not need to enter the phone password when you switch
the phone on.
- If SIM changed
Your phone will request security code only when you change
your SIM card.
• Immediately
After entering the correct security code, the phone will lock after
going into the idle state. If you want to disable this phone lock, you
should enter the right security code after pressing the right soft
key. If you power off in the phone lock state, when the phone is
next powered on, the phone is in the lock state.
Call barring service [Menu 9-4-3]
(Network dependent)
Call barring lets you restrict the making and receiving of calls with
your phone. For this function, you need the barring password, which
you can obtain from your service provider.
The following options are available:
• All outgoing
No call can be made.
92
Settings [Menu 9]
To Next Page
Loading...
