A12
Name and Function of the Parts
Using a Pen
Using a Pen
[When Using a Pen][Inserting a Battery]
[Using a Pen]
ON/OFF Button
Side Button (Upper)
Side Button (Lower)
Pen Content
[When Keeping a Pen]
Pen Cab
Pen Holder
Open the pen cab and insert the provided battery into it. Hold the pen as if you’re holding a
normal pen or pencil. Press the side button using your thumb or index finger.
1. ON/OFF button.
2. Side Button: You can set the right/left mouse button or double click function. Refer to
“How to Use USB Tablet Manager” (Page A11) on the details of function setting.
3. Pen Content: When the pen content is worn out, replace it with new one, which is included
in the product.
1. Pointing: The screen point moves when you move a pen nib on the tablet screen, not
touching it but moving just over it.
2. Click: Clicking the screen with a pen has the same effect as that of a mouse.
3. Double Click: Rapidly click the same screen position with a pen twice to imitate a mouse
double click. Or press the upper side button.
4. Drag: Drag the pen while holding the pen on the screen.
Replacing a Pen Content
If you use a pen for a long time, the pen content can be worn out, which causes a
sharp angle and damage to the LCD surface. Make sure to replace the pen
periodically.
1. Taking out the pen: Grasp the edge of the pen and pull out using tweezers or pincers.
2. Inserting a new pen: Gently insert the replacement pen software until it comes to a stop.
If you apply too much force, the pen may be bent or broken.
To use the pen side button as a right mouse button, click the side button while not touching
the pen on the screen.
Note
stand
To Next Page
Loading...
