A24
• Press the AUTO/SET button to adjust the screen
automatically with the optimal state that fits into the
currently selected mode.
If you’re not satisfied with the adjusted screen, use the
“Position” OSD menu to manually adjust the screen
position.
• See if the resolution or the frequency of the video card
is set within the range supported by the monitor. If not,
set to the recommended resolution at “Control Panel”
–> “Display” –> “Setting” menu.
• Press the AUTO/SET button to adjust the screen
automatically with the optimal state that fits into the
currently selected mode.
If you’re not satisfied with the adjusted screen, use the
“Clock” OSD menu to manually remove the vertical
lines.
• Press the AUTO/SET button to adjust the screen
automatically with the optimal state that fits into the
currently selected mode.
If you’re not satisfied with the adjusted screen, use the
“Phase” OSD menu to manually adjust it.
Screen position is wrong?
Vertical slim lines appear on the
background screen?
Horizontal noise appears or letters are
blurred?
Screen image is displayed abnormally
• Change the number of colors to 24 bits (true color) or
better.
: Windows Control Panel –> Display –> Setting –>
Color Table.
• Check signaling cable connection. If not properly
connected, connect it again. Or, plug in the PC video
card firmly.
• You may see several pixel dots (red, green, white or
black) while using the monitor due to the characteristics
of the LCD panel. It is not related with monitor
performance and is not a malfunction.
Screen is de-colored (16 colors)?
Screen color is unstable or mono-color?
Dots appear on the screen?
Screen color is displayed abnormally
• Install the provided monitor driver again or download
the driver from the LG Electronics web site
(http://www.lge.co.kr).
See if the plug & play function is supported by the
video card by referring to the video card user’s
manual.
Monitor driver is installed?
When the monitor is connected, the “Unknown Monitor” message appears
To Next Page
Loading...
