18
ENG
ENGLISH
ASSEMBLING AND PREPARING
CAUTION
When attaching the stand to the TV
set, place the screen facing down on a
cushioned table or flat surface to protect the
screen from scratches.
Make sure that the screws are inserted
correctly and fastened securely. (If they are
not fastened securely enough, the TV may
tilt forward after being installed.)
Do not use too much force and over tighten
the screws; otherwise screw may be
damaged and not tighten correctly.
NOTE
Remove the stand before installing the TV
on a wall mount by performing the stand
attachment in reverse.
2
3
1
Stand Body
Stand Base
P5 x 25
3EA
Front
M4 x 14
4EA
LN54/53**
To Next Page
Loading...
