10
SAFETY INSTRUCTIONS
y
When moving the product, make sure you turn the power
off first. Then, unplug the power cables, antenna cables and
all connecting cables.
The TV set or power cord may be damaged, which may
create a fire hazard or cause electric shock.
y
When moving or unpacking the product, work in pairs
because the product is heavy.
Otherwise, this may result in injury.
y
Contact the service centre once a year to clean the internal
parts of the product.
Accumulated dust can cause mechanical failure.
y
Refer all servicing to qualified service personnel. Servicing
is required when the apparatus has been damaged in any
way, such as power supply cord or plug is damaged, liquid
has been spilled or objects have fallen into the apparatus,
the apparatus has been exposed to rain or moisture, does
not operate normally, or has been dropped.
y
If the product feels cold to the touch, there may be a small
“flicker” when it is turned on. This is normal, there is nothing
wrong with product.
y
The panel is a high technology display product with
resolution of two million to six million pixels. You may see
tiny black dots and/or brightly coloured dots (red, blue
or green) at a size of 1 ppm on the panel. This does not
indicate a malfunction and does not affect the performance
and reliability of the product.
This phenomenon also occurs in third-party products and is
not subject to exchange or refund.
y
You may find different brightness and color of the panel
depending on your viewing position(left/right/top/down).
This phenomenon occurs due to the characteristic of the
panel. It is not related with the product performance, and it
is not malfunction.
To Next Page
Loading...
Need help?
General
