30
to operate at multiple power levels to use only the
power required to reach the network, in general, the
closer you are to a wireless base station antenna,
the lower the power output. Before a phone model is
available for sale to the public, it must be tested and
certified to the FCC that it does not exceed the limit
established by the government-adopted requirement
for safe exposure. The tests are performed in
positions and locations (e.g., at the ear and worn on
the body) as required by the FCC for each model.
The highest SAR values are:
•Head:1.05W/kg
•Body(Body-worn/Hotspot):1.28W/kg
(Body measurements differ among phone models,
depending upon available accessories and FCC
requirements).
While there may be differences between SAR
levels of various phones and at various positions,
they all meet the government requirement for safe
exposure. The FCC has granted an Equipment
Authorization for this model phone with all reported
SAR levels evaluated as in compliance with the
FCC RF emission guidelines. SAR information on
this model phone is on file with the FCC and can
be found under the Display Grant section of http://
www.fcc.gov/oet/ea/fccid after searching on FCC
IDZNFH345.
Additional information on Specific Absorption
Rates (SAR) can be found on the Cellular
Telecommunications Industry Association (CTIA)
website at http://www.ctia.org/.
*IntheUnitedStatesandCanada,theSARlimitfor
mobilephonesusedbythepublicis1.6watts/
To Next Page
Loading...
