20
INSTALLATION
ENGLISH
4
Lower the door into final position and
tighten the screws located on both sides.
5
With the drawer pulled out to full
extension, insert the lower basket in the
rail assembly.
Assembling the Freezer Drawers
The top and bottom drawers are all assembled
in the same way.
1
Using two hands, pull out both rails
simultaneously until they are fully
extended.
2
Grasp the drawer on each side and hook the
drawer supports into the rail tabs located on
both sides.
CAUTION
Do not hold the handle when removing
or replacing the drawer. The handle
may come off, causing personal injury.
3
Reinstall the bar in the drawer supports, then
insert and tighten the screw.
To Next Page
Loading...
