20 INSTALLATION
Assembling fhe Freezer Drawers
1 Pull out both rails simultaneously, until both
rails are fully extended.
3
Lower the door into its final position and
tighten the screws located on both sides.
2 Grasp the drawer on each side and hook the
drawer supports into the rail tabs located on
both sides.
4 Insert the drawer into the frame, and push
the drawer back into place until you hear a
click.
-_ CAUTION
Do not hold the handle when removing
or replacing the drawer. The handle
may come off, causing personal injury.
5 Insert the lower basket in the rail
assembly.
To Next Page
Loading...
