Basic Functions 45
2
Grab the lower part of the module as shown in the figure below, then
gently slide the module into the device until they are tightly fastened.
• Never press the module eject key when inserting the module into the
device.
Precautions when using the module
• When inserting the battery into the device, make sure that the
battery is attached to the module. Inserting the battery without the
module attached may damage the device.
• When replacing the battery, take extra care to ensure that no foreign
substance or water enters the device.
• Do not put the device in a hot and humid location when the battery
module is removed.
• Ensure that the inside of the device does not contact a metallic object
or water and does not get damaged.
• Leaving the device with the module separated for an extended period
of time may deform the device or damage the metallic contacts. This
may result in device malfunction.
• Never separate the module from the device without pressing the
module eject key. This may damage the device.
• Never remove the module when the device is in use.
• If a gap occurs between the module and device while you are using
the device, firmly insert the module into the device.
To Next Page
Loading...
