Custom-designed Features 24
Registering fingerprints
You can register and save your fingerprint on the device to use fingerprint
identification.
1
On the home screen, tap Settings Lock screen & security
Fingerprints.
• A lock screen must be set in order to be able to use this feature.
• If the screen lock is not active, configure the lock screen by following the
on-screen instructions. See
Setting a screen lock
for details.
2
Check the location of the fingerprint sensor at the bottom centre of
the screen, and lightly put the finger on the sensor.
• Make sure that the finger fully covers the fingerprint sensor.
3
Follow the on-screen instructions.
• Until the fingerprint registration is completed, move the same finger
around on the sensor little by little.
• Put the finger on the sensor. When you feel a vibration, remove the
finger from the sensor.
4
When the fingerprint registration is done, tap OK.
• Tap Add more to register another fingerprint. Since the fingerprint
recognition success rate depends on the condition of the registered
fingerprint, it is recommended that you register several different
fingerprints.
To Next Page
Loading...
