Why is my LG LM86 remote not working?
If you cannot control your LG LCD TV with the remote, ensure that there are no obstructions between the remote and the TV's sensor. Also, verify that the batteries in the remote are working correctly and are properly installed. Finally, check the remote control sensor on the TV.
What to do if my LG LM86 LCD TV has no picture and sound?
If your LG LCD TV shows no image and produces no sound, first, ensure that the TV is turned on. Next, check that the power cord is properly connected to the wall outlet. Finally, test the wall outlet by connecting other products to see if the outlet is working correctly.
Why does my LG LM86 turn off by itself?
If your LG LCD TV turns off suddenly, the power supply may be interrupted, so check the power control settings. Also, verify if the Auto sleep feature is activated in the Time settings. Note that the TV will turn off automatically after 15 minutes of inactivity if there is no signal while the TV is on.
Why does my LG LM86 turn off suddenly?
If your LG LCD TV turns off suddenly, check your power control settings and make sure that the power supply is not interrupted. Also, verify if the Auto sleep feature is enabled within the Time settings. Note that the TV will automatically shut down after 15 minutes of inactivity if there is no signal.
How to fix LG LCD TV remote control not working?
If you cannot control your LG LCD TV with the remote, first check the remote control sensor on the TV and try again. Then, ensure there are no obstructions between the remote and the TV. Lastly, check that the batteries in the remote are working and properly installed.
What to do if LG LCD TV says no signal when connecting to PC?
If your LG LCD TV displays ‘No signal’ or ‘Invalid Format’ when connected to a PC (RGB/HDMI DVI), try turning the TV off and on using the remote. If that doesn't work, try reconnecting the RGB/HDMI cable. As a final step, restart your PC while the TV is powered on.
How to fix ‘No signal’ on LG LM86 LCD TV when connecting to PC?
If you see a ‘No signal’ or ‘Invalid Format’ message on your LG LCD TV when connecting to a PC (RGB/HDMI DVI), try turning the TV off and then on again using the remote control. If that doesn't work, reconnect the RGB/HDMI cable. As another option, restart your PC while the TV is powered on.
To Next Page
General
