LG LP1419IVSM - INSTALLATION (VERTICAL)

13
EN
INSTALLATION (VERTICAL)
1 Inserting Panel Assembly
1
Fit the chassis fixing clips at both ends of
the mounting plate.
2
After adjusting the length of the mounting
plate to the chassis height, insert the clip
into the window sill.
<Small Windows><Small Windows>
• Refer to the <Positioning Vent Hose>
to adjust the hose outlet position.
3
Secure the mounting plate screws in
the mounting holes on both sides of the
mounting plate.
• If the screw fixing holes do not match,
use a power drill to drill the holes (3
mm) in the outer mounting plate in
accordance with the inner screw holes.
2 Connecting Vent Hose
1
Insert the hose into the groove in the
insertion direction.
Inserting directionInserting direction
2
Push the hose in the assembling direction
to assemble with the mounting plate.
Assembling Assembling
directiondirection