LG LP1419IVSM - Page 14

14
EN
3 Attaching Foam Weather Seals
1
Cut the mounting plate insulation to the
chassis length and insert it on both sides of
the mounting plate.
2
Move the mounting plate to the end of the
chassis, close the window and secure it
with the security bracket.
CAUTION
• Be sure to install the window fixing
bracket to prevent the window from
opening outside.
3
Cut the window gap insulation to the
window length and insert it into the window
gap.
4 Positioning Vent Hose
For best results, keep the vent hose as short and straight as possible. However, shape the diffuser end
of the vent hose into an inverted U shape just inside the window to allow any rain or condensation to
drain out the window.
8”
8”
15.7”
MinimumMinimum
<Best positioning> <inverted U shape> <Correct Installation Position>