iTEM NAME OF PARTS Qi'Ty
A SUPPORT, BRACKET !
B LEVEUNG BOLT 1
'C LEVEUNG BOLT 1
D SCREW: 5/8" 2
E SCREW: 5/8" 5
F FOAM SEAL 1
G FOAM STRIP 1
H L BRACKET 1
SCREWDRIVER(Philli_ and Rathead), RULER, KNIFE, HAMMER, PENCIL: LEVEL ]I
To avoid the _ssibility of persona! inju_, unplug
power to unit [beforeinst_ling or se_icingi
Carefully remove _r conditioner from carton, check
for possible shipping damage Pick a location which
will albw you to biow the cold air into the area you
w_nt. Windows used for install_ion must be strong
enough to sup_rt the weight of the air conditioner
Go_ installation with speci_ attention to _e proper
_siton of _e unit will lessen the chance that sewice
will be needed.
When coo_ingmore than one room, install_ion
location is very important. To cool your rooms, _d air
mustbe blown from the air _ndi_oner in a straight
path
If air conditioner is blocked by a storm window frame,
see Step'7and 8 on Page 14 before beginning to
insta&
How to,Instal
Cut the FOAM STRIP (_TEM G) to fit the
underside of 'the window sash Open the window, peel
off the backing and a_ach _e FOAM STR_Pas shown
in FIG, 1
(ITB,_ G}
FIG, 1
M_k center line with penci_on _e center d the
inner sill, as shown in FIG, 2,
_ND_R_"
CENTER LINE INNER S_LL
FIG, 2
To Next Page
Loading...
