Installsupport bracket on window, See FiG. 3,
Install_evelingbo_tup through _ttom side of support
bracket, You c&nchoose a short bolt (_TEMC} or a
bng one (_TEMB} according to window type, Also,
you should select he position of hole on bracket,
Posi_on bracket on sill I inch (25.4mm) to left of
center !ine of win®w (See FIG, 3}
Fasten bracket iooseiy to sili with screws (ITEM D)
Adjust leve_ingbolt so hat the air condiSonerwill be
installed w_h a veT slight _l't,{about1/4") downwald
toward _e outside for proper drainage. Tighten
bracket screws,
SIL,L
FIG. 3
_iREW SUPPORT
iNNERS_LL | BRACKET ABOUT 1,4°
/ ;t- f ........
FIG.4
Faiiure to securely instali support bracket may
result in unit failing from win_w if window sash is
raised after unit is installed This could result in
personal injury',
INSTALL THE AIR CONDITIONER IN
THE WIN DOW
•Carefully lift the air cond_ioner and slide it into _e
open window Be c_efui not:to hurt:waist:in this
• Use fhe _o hand grips on top sides of unit to lift
unit.
, Make surethat suppo_ bracket is inse_ed in the
Ip_ke't under base fan, and _at curtain frame guide
is stopped by stopper on the support bracket as
shown in FIG6.
NOTE: When unit is properly centered and pushed
ou_ard to correct bracket _ocation,you will feel _Jnit
drop se;ure!y in p_aceon the support bracket. Ho!d
unit firmly during _is procedure,.
, Lower top window sash all the way down sothat
sash sits fi_ly in top channel of unit and
expandaNe curtain frames
During the b!iowing step, hold unit firmiy unti!
'windowsash is lowered to top channe_behind
cu_ain frames Personal iniu_ or property damage
may result if unit falls from win_w
RGi, 5
T_ _4N_EL ...............
_JRTAN
14ANOGRIIP
__i;i _¸ i_
:::::::::::::::::::::::::::::::::::::::::::::
SU_R_
_K_'T
RG, 6
To Next Page
Loading...
