IMPORTANT: To avoid possible injury, product or property
damage, you will need two people to perform the following
instructions.
1. Removing Pullout Drawer
Pull the drawer open to full extension. Remove the
screw (1) from each side of rail system.
Remove the lower basket (2) by lifting basket from rail
system.
2. Installing Pullout Drawer
Lift the top of door to unhook door supports from rail
system. Lift door out to remove.
Pull both rails (1) out to full extension.
Hook the door supports (2) into the rail tabs (3), as
illustrated, and lower door into final position.
With the drawer pulled out to full extension, insert the
lower basket (4) in rail assembly.
REFRIGERATOR INSTALLATION
15
HOW TO REMOVE AND INSTALL THE
RELEASE DRAWER
To Next Page