44 SMART FUNCTIONS
Press and hold the Freezer button for three
seconds while continuing to hold your
phone to the speaker.
After you hear three beeps, release the
Freezer button.
Keep the phone in place until the tone
transmission has finished. The display will
count down the time. Once the countdown
is over and the tones have stopped, resume
your conversation with the specialist, who
will then be able to assist you in using the
information transmitted for analysis.
NOTE
• For best results, do not move the phone while
the tones are being transmitted.
• If the call center agent is not able to get an
accurate recording of the data, you may be
asked to try again.
• The Smart Diagnosis™ function depends on the
local call quality.
• Bad call quality may result in poor data
transmission from your phone to the call center,
which could cause Smart Diagnosis™ to
malfunction.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
