35OPERATION
ENGLISH
• Vegetables keeps moist air in the crisper for
best storage of fresh, leafy vegetables.
• Fruit lets moist air out of the crisper for best
storage of fruit.
Removing/Assembling the
Humidity Controlled Crispers
1 Open the doors completely and remove the
contents of the Door-in-Door case. Lift up and
pull out the Door-in-Door case.
• The Door-in-Door feature is only available on
some models.
2 Pull out the crisper to full extension, lift the
front up, and pull straight out.
3 Lift the front of the cover up with both hands
until it detaches from the back wall of the
cabinet, then pull it out.
4 To reassemble, insert the cover into the
refrigerator with both hands and lower it onto
the guides.
5 Slightly tilt up the front, insert the crisper into
the frame and push it back into place.
6 Line up the tabs on the Door-in-Door case
with the slots on the door and push down
until it snaps into place.
• The Door-in-Door feature is only available on
some models.
To Next Page
Loading...
