LG LRFXS2513 Series - Smart Diagnosis Feature

42 SMART FUNCTIONS
returns to its normal state when the door is
opened or closed, or the dispenser is used.
Override Smart Grid Mode
To ignore the Demand Response signal from the
utility company and override the Smart Grid
function, push the Smart Grid button while the
refrigerator is in Smart Grid mode.
When you override the Smart Grid function, the
refrigerator ignores the Demand Response signal
and is no longer controlled by the utility company
until the next Demand Response signal is sent. You
can also override the Smart Grid function using the
smart phone app.
LG Open API
You can manage Smart Grid features for the LG
Smart Refrigerator.
Please check the detailed specifications on the
notice page on us.smartthinq.com.
API List
•Demand Response
- Send demand response signal
• Power Saving
- Set saving mode
- Get schedule of DR/Delay Defrost
• Energy Monitoring
- Get door open event
- Get energy consumption
• Delay Defrost Capability
- Insert a delay defrost schedule event
- Update a delay defrost schedule event
- Delete a delay defrost schedule event
- Get the delay defrost schedule
Smart Diagnosis™ Feature
This feature is only available on models with the c
or
d logo.
Use this feature to help you diagnose and solve
problems with your appliance.
NOTE
• For reasons not attributable to LGE’s negligence,
the service may not operate due to external
factors such as, but not limited to, Wi-Fi
unavailability, Wi-Fi disconnection, local app
store policy, or app unavailability.
• The feature may be subject to change without
prior notice and may have a different form
depending on where you are located.
Using Audible Diagnosis to
Diagnose Issues
Follow the instructions below to use the audible
diagnosis method.
• Launch the LG ThinQ application and select the
Smart Diagnosis feature in the menu. Follow
the instructions for audible diagnosis provided
in the LG ThinQ application.
1 Hold the Lock button for three seconds.
• If the display has been locked for over five
minutes, you must deactivate the lock and
then reactivate it.
2 Open both refrigerator doors.
3 Hold the mouthpiece of your phone in front of
the speaker that is located on the right hinge
of the refrigerator door.
4 Press and hold the Freezer button for three
seconds while continuing to hold your phone
to the speaker.
5 After you hear three beeps, release the
Freezer button.
6 Keep the phone in place until the tone
transmission has finished. The display will
count down the time. Once the countdown is
over and the tones have stopped, the
diagnosis will be displayed in the application.
NOTE
• For best results, do not move the phone while
the tones are being transmitted.